Sony PCV-RZ22G - Manual (Page 44)

About the Side Panel
Removing the side panel (PCV-RZ series model)
1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and disconnect any peripheral devices.
3. Lay the system unit on its side.
4. Locate the two tabs on the back edge of the right side panel.
5. Press up on these tabs and slide the side panel towards you.
6. Lift the side panel up and set aside.
Rem ov ing the side panel (PCV- RZ series m odel)
Removing the side panel (PCV-RX series model)
1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and disconnect any peripheral devices.
3. Locate the tab on the upper right side of the rear panel, and pull it back until the side panel releases.
4. Lift the side panel away from the unit and set aside.
Rem ov ing the side panel (PCV- RX series m odel)
If you remove the side panel immediately after you shut down your computer, the components may be too hot Page 44