Setting the timer manually (continued), Press ok – Sony SLV-777HF User Manual

Page 62

Basic Operations

Set the date, start and stop times, channel
number, and tape speed:

1 Press / to flash each item in turn.
2 Press >/. to set each item.
To correct a setting, press ? to return to
that setting and reset.

To record the same program every day or the same day every week,
press . while the date is flashing. For details, see “Daily/weekly
recording” on this page.

To record from a source connected to the LINE 1 IN or LINE 2 IN
jacks, press INPUT SELECT to display “L1” or “L2” in the “CH”
position.

Press / to confirm the setting.

The cursor (z) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.

Press OK.

Press POWER to turn off the VCR.

The

indicator appears in the display window and the VCR

stands by for recording. When using a cable box, leave it on.

Daily/weekly recording

In step 2 above, press . to select the recording pattern. Each time you press
., the indication changes as shown below. Press > to change the indication
in reverse order.

the current date n SU-SA n MO-SA n MO-FR n EVERY SA n ..... n
EVERY MO n EVERY SU n 1 month later n (dates count down) n the
current date

Tips
• To set the channel, you can also use the CH+/– , number buttons, or shuttle ring

during stop.

• To set the tape speed, you can also use SP/EP.

Note
• If you are using cable box control, you cannot select “L1” or “L2”.

Setting the timer manually (continued)

PLAY

• POWER

TIMER SET / CHECK

1 1 / 1 6

DATE

– / – –

– : – –

– –

– / – –

– : – –

– –

– / – –

– : – –

– –

– / – –

– : – –

– –

START STOP

11 / 1 6

– : – –

– –

– / – –

– : – –

– –

– / – –

– : – –

– –

– / – –

– : – –

– –