32 setting the clock (continued) – Sony SLV-777HF User Manual

Page 32

Getting Started

Setting the clock (continued)

Press ?// to select AUTO, then press
OK.

Press ?// to select YES, then press OK.

To activate the Auto Clock Set function, turn off the VCR.

The VCR automatically sets the clock by searching for a channel that
carries a time signal and sets your time zone and Daylight Saving
Time (if applicable).

If your clock is set to the wrong time zone or Daylight Saving Time,
you can adjust these settings without turning off the Auto Clock Set
feature (page 33).

Notes
• The clock cannot be set automatically if you don’t receive a channel that carries a

time signal in your area. If so, set the clock manually.

• If there are only a few channels in your area that carry time signals, setting the clock

automatically may take up to about 30 minutes. If nothing happens even after you
wait about 30 minutes, set the clock manually.

• If you use Hookup 1, make sure you leave the cable box on.

PLAY

SELECT
END
QUIT

YES

•

AUTO CLOCK SET

FULL AUTO