Sony PCV-RX851 - Manual (Page 26)

Connecting the telephone and modem cables
1. Unplug your telephone from the wall jack.
2. Plug the modem cable (supplied) into the Modem line jack on the computer, and then plug the other end of the
cable into the wall jack.
To connect the telephone and m odem cable (PCV- RZ series m odel shown)
Your computer has a protective sticker covering the Ethernet port located on the rear panel.
Connect only 10BASE-T and 100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable
may result in an electric current overload and can cause a malfunction, excessive heat or fire in the port. For help
on connecting to a network, see your network administrator.
Page 26