Sony STR-DH500 - Manual (Page 48)

48 US
1
Press TUNER repeatedly to
select the FM or AM band.
2
Press PRESET + or PRESET –
repeatedly to select the preset
station you want.
Each time you press the button, you can
select a preset station as follows:
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
“PRESET T.”.
3 Press TUNING + or TUNING – repeatedly
to select the preset station you want.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Tune in the preset station you
want to create an index name
for (page 48).
3
Press AMP MENU.
“1-LEVEL” appears on the display.
4
Press V/v repeatedly to select
“4-TUNER”.
5
Press or b to enter the
menu.
6
Press V/v repeatedly to select
“NAME IN”.
7
Press or b to enter the
parameter.
The cursor flashes and you can select a
character.
8
Press V/v to select a character,
then press B/b to move the
cursor to the next position.
If you made a mistake
Press
B/b until the character you want to
change flashes, then press V/v to select
the correct character.
Tips
• You can select the character type as follows
by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
• To enter a blank space, press b without
selecting a character.
9
Press .
The name you entered is registered.
Tuning to preset stations
01 02 03 04 05 27 ...
30 29 28
Naming preset stations