Sony PCV-RX640 - Manual (Page 17)

Connecting the modem cable
1. Unplug your telephone from the wall jack.
2. Plug the modem cable (supplied) into the Modem line jack on the computer, and then plug the other end of the
cable into the wall jack.
Connecting the modem cable
Caution:
Your computer has a protective sticker covering the Ethernet port located on the rear panel. Connect
only 10BASE-T and 100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may
result in an electric current overload and can cause a malfunction, excessive heat or fire in the port. For
help on connecting to a network, see your network administrator.
Page 17