Allied International GX1050C - Manual (Page 5)

GX1050 Technical Manual Page 5
Introduction
The GX1050 series of cameras are sensitive, 112 frames per second, 1 megapixel,
Gigabit Ethernet
cameras based on the Kodak KAI-01050 CCD sensor. These cameras
support the use of 1 or 2 gigabit Ethernet ports in a LAG configuration for higher
bandwidth requirements.
Precautions
READ INSTALLATION GUIDE CAREFULLY.
This document contains specific information which is necessary for the correct operation
and treatment of this product.
DO NOT OPEN THE CAMERA. WARRANTY IS VOID IF CAMERA IS OPENED.
This camera contains sensitive components which can be damaged if handled
incorrectly.
KEEP SHIPPING MATERIAL.
Poor packaging of this product can cause damage during shipping.
VERIFY ALL EXTERNAL CONNECTIONS.
Verify all external connections in terms of voltage levels, power requirements, voltage
polarity, and signal integrity prior to powering this device.
CLEANING.
This product can be damaged by some volatile cleaning agents. Avoid cleaning the
image sensor unless absolutely necessary. Please see instructions on sensor cleaning
in this document.
DO NOT EXCEED ENVIRONMENTAL SPECIFICATIONS.
See environmental specifications limits in the Specifications section of this document.
Warranty
AVT Canada Inc. provides a 2 year warranty which covers the replacement and repair
of all parts which are found to be defective in the normal use of this product. AVT