Allied International GX1050C - Manual (Page 20)

GX1050 Technical Manual Page 20
adapter from others in your system. Click “ Next ” to continue.
12. Select the two Ethernet ports to which the GX
camera will be connected. These ports will
form our LAG or TEAM. Click
“ Next ” to
continue.
13. Choose “ Static Link Aggregation ” . Click
“ Next ” to continue.
14. The LAG group will now be configured. You may
be asked to permit the “ AVT_Prosilica GigE Vision
Filter Miniport ” installation on the new LAG adapter.
Click “ Continue Anyway ” .