Asus INTEL TUSL2-C - Manual (Page 20)

ASUS TUSL2-C User’s Manual
3. HARDWARE SETUP
20
Motherboard Settings
3. H/W SETUP
3) Onboard CMI8738 PCI Audio Setting (AUDIO_EN)
(available on audio model only)
The onboard CMI8738 PCI 6 channel Audio chip may be enabled or disabled
using these jumpers. Disable the onboard audio Codec if using a PCI audio card
on any of the expansion slots or a primary audio/modem CNR on a CNR slot
(see CNR Slot later in this section).
Setting
AUDIO_EN
Enable [1-2] (default)
Disable [2-3]
TUSL2-C
®
TUSL2-C Audio Setting
Disable
Enable
(Default)
1 2 2 3
AUDIO_EN
4) Keyboard Power Up (KBPWR)
This jumper disables or enables the keyboard power up function. Set this jumper
to Enable if you wish the keyboard (by pressing ) to power up the
computer. This feature requires an ATX power supply that can supply at least
300mA on the +5VSB lead. The default is set to Disable because not all
computers have the appropriate ATX power supply. The computer will not power
ON if you set this to Enable and if the wrong ATX power supply is connected.
NOTE: This jumper must be set in conjunction with Wake On PS2 KB/PS2
Mouse/CIR in 4.5.1 Power Up Control.
Setting
KBPWR
Enable [1-2] (default)
Disable [2-3]
TUSL2-C
®
TUSL2-C Keyboard Power Setting
KBPWR
Disable
2
3
Enable
(Default)
1
2