Nilfisk-ALTO ATTIX 965-0H/M SD XC - Manual (Page 17)

16
english
ATTIX 9 H/M
1) Optional accessories / Option depending on model
4.2.4 Auto-On/Off-Operation
- "auto" switch
position
1)
The vacuum cleaner is switched on
and off by the power tool connect-
ed. Dirt is picked up from the source
of dust immediately.
To comply with regulations, only ap-
proved dust producing tools should
be connected.
The maximum power consumption
of the connected electrical appli-
ance is stated in section 9.5 "Tech-
nical data".
Before switching the switch to posi-
tion „auto“, ensure that the tool con-
nected to the appliance socket is
switched off.
1. Switch off the vacuum clean-
er.
2. Switch off the power tool.
auto
ш ш 0 ш ш 3 3 6 5 2 2 7
3. Connect the power tool and
the vacuum cleaner with a
suction hose.
4. Insert the plug of the pow-
er tool into the tool socket
on the operating panel
of the vacuum cleaner.
5. Switch on the vacuum clean-
er. Switch in "auto" position.
6. Switch on the power tool. The
vacuum cleaner motor starts
when the connected power
tool is switched on.
When the power tool is
switched off, the vacuum
cleaner continues to run for
a short moment so that any
dust in the suction hose is
conveyed to the filter bag.