Sony FWD-50PX1 - Manual (Page 58)

8
(GB)
Location and Function of Parts and Controls
Indicator Section
1 Remote control detector
Receives the signals from the Remote Commander.
2 POWER/STANDBY indicator
Lights up in green when the display unit is powered
on. Lights up in red in the standby mode.
When the POWER/STANDBY indicator blinks, see “Self-
diagnosis Function” on page 44 (GB).
Control Button Section (Top)
1 MENU button
Press to show menus. Press again to hide them.
2 3 m/M (cursor/volume) button
Press to move the cursor (yellow), set a value, or
control speaker volume.
4 ENTER button
Press to set your choice.
5 1 (POWER) switch
Press to power on the display unit. Press again to
return to the standby mode.
Note
To protect the panel, a certain amount of time is
required to turn the unit ON/STANDBY. Wait about 5
seconds after one of these operations before pressing
this switch again.
1 2
1 2 3 4 5