Avanti WDB101 - Manual (Page 5)

5
Step 3: Assembling the Middle Support
Frame and Logo / Support Bar.
The Middle support frame (Part B) MUST be installed to
maintain the stacking bracket square and stable.
a) Using the Shelf / Frame support clips (Part I) insert
the plastic tapered clips into the appropriate
grooves on each leg. (See the image).
b) Align the corner holes of the Middle support
frame (Part B) with each of the legs and gently
lower onto the support clips. Press each corner
downward firmly to ensure the support frame is
fully locked into position.
c) Using the Shelf / Frame support clips (Part I) insert
the plastic tapered clips into the appropriate
grooves on each of the rear legs. (See the image).
d) Align the holes on each end of the LOGO / Support
Bar (Part O) with each of the rear legs and slightly
lower onto the support clips.
Step 4: Assembling the Top Shelf:
a) Using the Shelf / Frame support clips (Part I) insert
the plastic tapered clips into the appropriate
grooves on each of the rear legs. (See the image).
b) Align the holes at each corner of the Top Shelf
(Part C) with each of the legs and gently lower
onto the support clips.