Sony TMR-BT10 - Manual (Page 19)

19
US
When listening to
music
No sound
, Check the connection between this
unit and the stereo audio source
device connected to this unit.
, Check that both this unit and the
BLUETOOTH stereo audio receiving
device are turned on.
, Ensure that this unit is not too far
from the BLUETOOTH stereo audio
receiving device, or this unit is not
receiving interference from a wireless
LAN, other 2.4 GHz wireless device,
or microwave oven.
, Check that BLUETOOTH connection
is made properly between this unit
and the BLUETOOTH stereo audio
receiving device.
, Turn up the volume of the
BLUETOOTH stereo audio receiving
device. For details on volume
adjustment, refer to the operating
instructions supplied with the
BLUETOOTH stereo audio receiving
device.
, Turn up the volume of the stereo
audio source device as high as
possible to the extent that sound is
not distorted.
, Pair this unit and the BLUETOOTH
stereo audio receiving device again.
Low sound level
, Turn up the volume of the stereo
audio source device as high as
possible to the extent that sound is
not distorted.
, Turn up the volume of the
BLUETOOTH stereo audio receiving
device. For details on volume
adjustment, refer to the operating
instructions supplied with the
BLUETOOTH stereo audio receiving
device.
, Connect the audio in plug to the
headphone jack instead of the LINE
OUT jack.
Distorted sound
, Turn down the volume of the stereo
audio source device to the point
where the sound is no longer
distorted. For details on volume
adjustment, refer to the operating
instructions supplied with the stereo
audio source device.
, Connect the audio in plug to the
headphone jack instead of the LINE
OUT jack.
Cannot be connected to a
device that has been
paired and connected
before.
, This unit tries to connect with either
of the last two devices recognized
before. If this unit cannot make the
BLUETOOTH connection with a
paired device, pair the device again,
or try making the BLUETOOTH
connection from the BLUETOOTH
stereo audio receiving device if
possible.
, Pairing information may be deleted.
Pair the device again.