Sony TMR-BT10 User Manual

Page 13

• BLUETOOTH connection of

this unit is established with
A2DP (Advanced Audio
Distribution Profile)*

• For details on how to operate the

BLUETOOTH receiving device,
refer to the operating instructions
supplied with the device.

* For details on profiles, see page 17.

Start playing on the
stereo audio source
device connected to this
unit.

Notes
• If sound is distorted, turn down

the volume of the connected
device.

• If volume is low or noise occurs,

turn up the volume of the
connected device.

• Turn off the bass boost function

or equalizer function. If these
functions are on, sound may be
distorted.

Tips
• Turn up the volume of the stereo

audio source device as high as
possible to the extent that sound
is not distorted, then adjust the
volume on the BLUETOOTH
receiving device to a moderate
level.

• If this unit is in your bag, the

BLUETOOTH connection may
decline. Clip this unit on the bag.

Notes

• Even if the BLUETOOTH receiving

device supports AVRCP (Audio Video
Remote Control Profile), this unit
cannot perform playback control
functions.

• In the following cases, you need to

make the BLUETOOTH connection
again.
– The power of this unit does not turn

on.

– The power of the BLUETOOTH

stereo audio receiving device does
not turn on, or the BLUETOOTH
function is off.

– The BLUETOOTH function of this

unit or the BLUETOOTH stereo
audio receiving device is in sleep
mode.

– The BLUETOOTH connection is not

made.

To stop use

Turn off the
BLUETOOTH receiving
device.

Press and hold the
POWER button on this
unit for about 3
seconds.

The indicator (blue) and
indicator (red) light up
together, and the unit turns off.

Tip

When you finish playing music, the
BLUETOOTH connection may terminate
automatically, depending on the
BLUETOOTH device.