Using a wall-mount bracket, Installing the tv against a wall or enclosed area – Sony KDL-55W900A User Manual
Page 21
D:\SONY TV\SY130150_H1 (Rev-1)\4447572121_US\US03STU.fm
KDL-55W900A
4-447-572-12(1)
21
Getting Started
Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand; see
page 11 (Detaching the Table-Top Stand
from the TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
• The length of the screw for Wall-Mount
Bracket differs depending on the
mounting hook thickness. Please see
below illustration.
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
~
• Read the supplied Safety Booklet for
additional safety information.
Installing the TV
against a wall or
enclosed area
Make sure that your TV has adequate
ventilation. Allow enough space around the
TV as shown in the illustration.
~
• Inadequate ventilation can lead to
overheating of the TV and may cause
damage to your TV or cause a fire.
8-12 mm
Screw
Mounting Hook
Hook attachment on rear of
TV set
Leave at least this much space around the set.
Installed with stand
4 inches
(10 cm)
11
7
/
8
inches
(30 cm)
4 inches
(10 cm)
2
3
/
8
inches
(6 cm)
Installed on the wall
Leave at
least this
much space
around the
set.
4 inches
(10 cm)
4 inches (10 cm)
4 inches
(10 cm)
11
7
/
8
inches
(30 cm)
Never install the TV set as follows:
Air circulation is blocked.
Air circulation is blocked.
Wall
Wall