Sony KDL-55W900A - Manual (Page 18)

D:\SONY TV\SY130150_H1 (Rev-1)\4447572121_US\US03STU.fm
KDL-55W900A
4-447-572-12(1)
18
The length of the M4 machine screw
differs depending on the rope or chain
diameter. Please see below illustration.
~
Contact Sony Customer Support to obtain
the optional Support Belt Kit by providing
your TV model name.
• For United States call: 1-800-488-7669
• For Canada call: 1-877-899-7669
3
Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
~
• Your TV is shipped with screws attached
to the rear of the TV depending on the TV
model. (They are fastened in the screw
holes for wall mounting.) Be sure to
remove the upper two screws prior to
anchoring the TV to a wall.
• Securing the TV to the stand without
securing the TV and the stand to the wall
provides minimum protection against the
TV toppling over. For further protection,
be sure to follow the three measures
recommended.
5: Bundling the
cables
Before bundling the cables, remove the
cable holder from the AC cover. Reuse the
cable holder to bundle the other cables.
~
• Do not bundle the AC power cord together
with other cables.
* When installing on the wall, attach the cable holder
under the terminals.
Screw M4
Rope or
chain
TV’s
Table-Top
Stand
6-8 mm
Anchor bolts (M6) (not supplied)
Wall-
mount
holes
Rope or
chain (not
supplied)
Wall-anchor
(not
supplied)
1 2
4 3 *