Sony KLV-26HG2 - Manual (Page 10)

10
Installing and Connecting the TV
Bundling Cords and
Cables
You can organize the cables in the back of the TV.
1
Bundle the cables and secure them with the clips
on both sides of the TV.
Notes
• It may not be possible to fasten with clips if cables are too
thick.
• If all the cables cannot be stored inside, you may leave
some of them hanging down on both sides of the TV.
2
Gather the cables from both sides together and
secure them with the clip at the bottom.
Note
It may not be possible to fasten with clips if cables are too
thick.
3
Attach the supplied rear cover, as needed.
See “Attaching the Rear Cover” on page 11.
Note
If the cables are not neatly stored, you may not be able to attach
the rear cover.
Clips
Clip