beautypg.com

Specifications, Display messages – Sony SCD-XA9000ES User Manual

Page 32

background image

32

US

Additional Information

When a super audio CD is played

Playing frequency range

2 Hz to 100 kHz

Frequency response

2 Hz to 50 kHz (–3 dB)

Dynamic range

108 dB or more

Total harmonic distortion rate

0.0012 % or less

Wow and flutter

Value of measurable limit (±0.001 %
W. PEAK) or less

When a CD is played

Frequency response

2 Hz to 20 kHz

Dynamic range

100 dB or more

Total harmonic distortion rate

0.0017 % or less

Wow and flutter

Value of measurable limit (±0.001 %
W. PEAK) or less

Output connector

*Output only the audio signals of the CD

i.LINK section

Pin

4 pins

Transmission speed

S200
(Maximum data transmission speed
200 Mbps)

Transmission protocol

A/M transmission protocol

Format (output)

Super Audio CD* (DSD PLAIN)
2 channel linear PCM (IEC 60958-3)
Sampling frequency: 44.1 kHz

* Conforms to the copy protection technology of DTLA (Revision

1.2).

ANALOG OUT

DIGITAL (CD)
OUT
OPTICAL*

DIGITAL (CD)
OUT
COAXIAL*

PHONES

Jack type

Phono
jacks

Square
optical
output
connector

Coaxial
output
connector

Stereo
phone jack

Output level

2 Vrms
(at 50 kilohms)

–18 dBm

0.5 Vp-p

10 mW

Load impedance

Over 10 kilohms

Light emitting
wave length:
660 nm

75 ohms

32 ohms

( )

Specifications

The following table explains the various messages that
appear in the display.

Message

Error code(s) Cause and/or remedy

TOC ERROR

An incompatible disc is inserted.

BUS FULL

C78:15

The signal bus within the i.LINK
configuration is full and no more
signals can be output from the
player. Cancel the LINC between
the component and this player.

Display Messages