Sony VGP-UPR1 - Manual (Page 22)

VGP-UPR1 (JP/GB/FR/ES/BrPT) 4-173-05-01(1)
10 GB
Symptom Cause/Action
The input sound is distorted.

The microphone volume is too high.
Action 1
 Right-click the icon on the taskbar, and select the recording
device.
 From the displayed recording device, select “Microphone
C-Media…,” and click “Properties.” “Microphone Properties”
screen appears. Select the “Levels” tab and set the microphone
volume according to your microphone.
Action 2
 Right-click the icon on the taskbar, and select the recording
device.
 From the displayed recording device, select “Microphone
C-Media…,” and click “Properties.” “Microphone Properties”
screen appears. Select the custom tab and turn AGC (Automatic
Gain Control) to off.
External Display
Symptom Cause/Action
Nothing appears on the
display, or images are
displayed abnormally.

Disconnect the product from the personal computer or disconnect the
display from the product, wait for a few seconds, then reconnect. See
“Disconnecting the product” (see the instruction manual supplied with
your product), “Connecting to the personal computer” (see the
instruction manual supplied with your product).

The setup program did not finish.
Install the dedicated software.

The DVI-D connector and MONITOR connector cannot be used
simultaneously.
Connect the display to either the DVI-D or MONITOR connector.

Images are not displayed in the specified resolution.
The maximum resolution for the product is 1680 × 1050. Resolution
higher than 1680 × 1050 will not be displayed.

There are conditions required by the software.
This product does not meet the conditions required for 3D games. If
software such as 3D games is activated with this product connected,
the output from the product or the display of the personal computer
will not be stable. Disconnect the product then use the software.

The product does not support Windows Aero.
The personal computer screen
(clone (mirror) mode) or copy
does not appear on the display.

The display output of this product functions only in the extended
desktop mode. To use clone mode (mirror mode) or copy, use the
external display output of the personal computer.