Acumen Ergo Basix - Manual (Page 10)

4. Upper Target Zone Limit
(blinking)
adjust the value.
- Press MODE/SET button to
proceed to the next item.
5. Lower Target Zone Limit
(blinking)
adjust the value.
- Press MODE/SET button to
proceed to the next item.
6. In-Zone Goal Count-down
Timer (blinking)
adjust the value.
- Press MODE/SET button to
proceed to the next item.
7. Exercise Factor (blinking)
adjust the value. (Refer to
page 11 to set it)
- Press MODE/SET button to
exit the setting mode.
From Time Mode, press MODE/
SET button twice to enter In-Zone
Goal Countdown Mode.
In-Zone Goal Countdown Mode
The In-Zone Goal Countdown timer will be activated
(indicated by blinking), the minute your heart rate reaches
the set Target Zone. After reaching the set goal, it produces
four long beeps, the timer will be stopped and the display
shows the ‘‘In-Zone Countdown time setting’’ alternating
with ‘‘GOAL". To clear it by pressing and holding
button in the In-Zone Countdown Mode.
9
RESET/
‘‘:”
- Press buton to RESET/ /
- Press buton to RESET/ /
- Press buton to RESET/ /
- Press buton to RESET/ /
/