Allowing/blocking access from controller – Sony KDL-55HX850 User Manual
Page 132
Font Size
>
> Allowing/blocking access from controller
Allowing/blocking access from controller
Overview
You can allow or block access from a specified controller.
Steps
1.
Press the HOME button, then select
[Settings] at the bottom of the screen using the
/
buttons.
2.
Select [Network] using the / buttons, then press the
button.
3.
Select [Home Network Setup] using the / buttons, then press the
button.
4.
Select [Remote Device / Renderer] using the / buttons, then press the
button.
5.
Select [Renderer Access Control] using the / buttons, then press the
button.
6.
Select the controller using the / buttons to change the access permission setting, then
press the
button.
7.
Select [Allow] or [Block] using the / buttons, then press the
button.
Select [Allow] to allow access from the controller. Select [Block] to block access from the
controller.
To return to the last viewed source, press the HOME button twice.
© 2012 Sony Corporation