Sony PCV-RZ26G - Manual (Page 49)

Installing a memory module
1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and any peripheral devices.
3. Remove the side panel. See About the Side Panel .
4. Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to access
the memory module slots.
To remove the power supply (for PCV-RX series model only)
1. Remove the screw that secures the power supply unit to the chassis.
2. Pull the tab that releases the power supply from the chassis.
3. Slide the power supply unit up until it clears the chassis.
4. Rotate the power supply to an upside down position and rest it beside the chassis.
5. Remove the memory module from its anti-static package, handling it by the the edges.
6. Locate the notch on the bottom edge of the module to align it over the open memory slot.
7. Firmly insert the bottom edge of the memory module into the slot.
Page 49