Sony DVP-NC615 - Manual (Page 63)

63
Set
tings
a
nd
Adj
u
st
m
e
nt
s
Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select “SCREEN SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” on page 61.
The default settings are underlined.
The on-screen displays differ depending on
the player model.
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
Note
Depending on the DVD, “4:3 LETTER BOX” may
be selected automatically instead of “4:3 PAN
SCAN” or vice versa.
◆ COLOR SYSTEM (VIDEO CD only; For
Asian/Oceanian models only)
Selects the color system when you play a
VIDEO CD.
Notes
• You cannot change the color system for DVDs.
• You can change the color system of this player
according to the connected TV. See page 16.
◆ SCREEN SAVER
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play back a CD or
DATA CD (MP3 audio) for more than 15
minutes. The screen saver will help prevent
your display device from becoming damaged
(ghosting). Press H to turn off the screen
saver.
4:3 LETTER
BOX Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3 PAN
SCAN Select this when you connect a
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9 Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
COLOR SYSTEM: AUTO
Example: Asian/Oceanian models
AUTO Outputs the video signal in the
system of the VIDEO CD,
either PAL or NTSC. If your
TV is the DUAL system, select
AUTO.
PAL Changes the video signal of an
NTSC VIDEO CD and outputs
it in the PAL system.
NTSC Changes the video signal of a
PAL VIDEO CD and outputs it
in the NTSC system.
ON Turns on the screen saver.
4:3 PAN SCAN
4:3 LETTER BOX
16:9
c continued