Sony KDL-52XBR9 - Manual (Page 20)

20
Remote Control Button Description
Button Description
1 DISPLAY Press once to display information about the
channel/program/input you are viewing. The
information will time out in a few seconds or press
again to exit. You can change the display preference,
press HOME and go to Preferences to set Info
Banner to Small, Medium or Large.
2 LIGHT Press to light up the remote control buttons. Refer to
the online Reference Book for additional information
on the remote control backlight.
3 FUNCTION
Buttons
The FUNCTION button indicator lights up momentarily
when pressed to show which external equipment the
remote control is operating. These buttons can be
programmed to operate external equipment. You must
first press one of these FUNCTION buttons to operate
the corresponding equipment. See page 24 for
“Programming the Remote Control”.
4 SYNC
MENU
The buttons listed below can operate video equipment
programmed to the DVD, AMP, or STB FUNCTION
buttons of the remote control. When the TV
FUNCTION button is selected, the buttons can also be
used to control the connected equipment with the
Control for HDMI function (not available on all
Control for HDMI equipment).
Some other buttons on the remote control may also
operate BRAVIA
®
Sync TM equipment.
. PREV: Press to replay the current program from
the previous chapter mark (if any) or from the
beginning of the live TV cache.
REPLAY: Press to replay the current program for
a set period of time.
ADVANCE: Press to advance forward a set
period of time when playing back a recorded program.
> NEXT: Press to advance forward to the next
chapter mark (if any) or to live TV when playing back
a recorded program.
m (fast reverse): Press to play a program in fast
rewind mode.
N PLAY: Press to play a program at a normal speed.
M (fast forward): Press to play a program in fast
forward mode.
X PAUSE: Press to pause playback.
x STOP: Press to stop playback.
SYNC MENU: Press once to display the Sync’d HDMI
Devices (while a Control for HDMI device is not
selected). Select the HDMI device and then press SYNC
MENU to display the menu of connected equipment (not
available on all Control for HDMI equipment).
THEATER: Press to turn on and off the Theater
Mode. The picture settings will be set for a cinema-like
experience and the audio will be switched to the audio
output of the attached speakers of your BRAVIA Sync
audio system. Your BRAVIA Sync audio system must
be connected by an HDMI connection to your TV (see
page 43 for details).
BRAVIA INTERNET
VIDEO WIDGETS
DISPLAY
VOL CH
MUTING
REC REC PAUSE REC STOP
F2 F1 MENU TOP MENU
BD/DVD
JUMP
DVD AMP STB TV
PREV REPLAY ADVANCE NEXT
THEATER SCENE CC WIDE
LIGHT POWER TV POWER
SYNC MENU PAUSE
PLAY
FUNCTION
STOP
YELLOW BLUE GREEN RED
~
• The 5, PLAY and CH +
buttons have a tactile
dot. Use them as a
reference when
operating the TV.
1
2
3
4
<
z
<
z