Bundling the connecting cables, Installing the tv against a wall or enclosed area, Enclosed area – Sony KDL-52XBR9 User Manual
Page 15: 15 bundling the connecting cables, Never install the tv set as follows, Gettin g sta rte d, Installed with stand, Installed on the wall
Gettin
g
Sta
rte
d
15
Bundling the Connecting Cables
Use the attached cable clamper to bundle the connecting cables. The cable clamper is located on
the Table-Top Stand as illustrated. Refer to the online Reference Book when mounting the TV to a
wall.
Do not bundle the AC power cord with other connecting cables.
Installing the TV Against a Wall or Enclosed Area
Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown
below. Avoid operating the TV at temperatures below 41 °F (5 °C).
(30 cm)
11
7
/
8
inches
(6 cm)
inches
4 inches
(10 cm)
4 inches
(10 cm)
2
3
/
8
Leave at least this much space around the set.
Installed with stand
inches
11
7
/
8
4 inches
(10 cm)
4 inches
(10 cm)
4 inches (10 cm)
(30 cm)
Installed on the wall
Leave at least
this much space
around the set.
Never install the TV set as follows:
Air circulation is blocked.
Air circulation is blocked.
Wall
Wall
• Inadequate ventilation can lead to overheating of the TV and may cause TV damage or cause
a fire.