Sony KDL-26M3000 - Manual (Page 11)

11
Gettin
g
Starte
d
Getting Started
1. Installing the TV
~
• The Table-Top Stand for this product is packaged separately (for models KDL-26M3000/KDL-26ML130/
KDL-37M3000). To install the TV unit to the Table-Top Stand before the connection and setup, refer to the
Table-Top Stand instructions (supplied with the TV set).
1 Screw the support belt (supplied) to the TV
stand (not supplied) with a wood screw
(supplied).
2 Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
3 Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.
~
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial screws
1
/ 8 to
3
/ 16 inch (3 to 4 mm) diameter to fit to the TV
stand. Consult your dealer about the types of screw(s).
You can bundle the connecting cables as illustrated
below.
~
• Do not bundle the AC power cord with other
connecting cables.
Preventing the TV from Toppling Over
2
3
1
TV
stand
Table-Top
Stand
Bundling the Connecting Cables
1
2