Alpine CDA-9811 - Manual (Page 11)

9
-EN
CD / MP3 / WMA
Playback
1
Press c.
The movable display will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will begin.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER → CD → CD CHANGER* → TUNER
* Only when the CD changer is connected
3
Press g or f to select the desired track (file).
Returning to the begining of the current track (file):
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track (file) :
Press f.
Fast forward :
Press and hold f.
4
To pause playback, press -/J.
Pressing -/J again will resume playback.
5
To eject the disc, press c.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold c for at least 3 seconds
with the movable display open.
• The CD-player can play discs containing audio data, MP3 data
and WMA data.
• The MP3 indicator is lit during MP3 playback.
• The WMA indicator is lit during WMA playback.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• While playing back MP3/WMA, press 8 or 9 to move the folder
up or down.
c
-/J
g f
Rotary
encoder
SEARCH
6( )
8
9 4( ) 5( )
Station Title Search Function
If titles for radio stations are entered, you can search for a radio
station from its title.
.
1
Press SEARCH in Radio mode to switch to Title
Search mode.
The first title input blinks in the display.
2
Select the desired title by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to receive the
frequency of the selected title.
• Search mode in Title Search mode is canceled by pressing and
holding SEARCH for at least 2 seconds.
• If a station has no title, "NO TITLE" is displayed for 2 seconds.
Quick Search Function
You can search for a radio station by its frequency.
1
Press and hold SEARCH for at least 2 seconds
in Radio mode to activate Quick Search mode.
2
Turn the Rotary encoder within 10 seconds to
select the desired frequency.
3
Press the Rotary encoder to receive the selected
frequency.
• Search mode in Quick Search mode is canceled by pressing and
holding SEARCH for at least 2 seconds.
SOURCE/
POWER