Sony PCV-J200 - Manual (Page 50)

VAIO® System Reference Manual 38
10 Press down firmly and evenly at both corners until the module is
fully seated.
11 Replace the power supply by sliding it down the rails on each side of
the chassis opening until the metal tab on the power supply slips into
the slot in the CD-RW/DVD combo drive.
12 Replace the side panel (see “Replacing the Side Panel” on page 25).
13 Reconnect the power cord, and turn on the computer.
Your computer automatically recognizes the extra memory and will
configure itself accordingly when you turn on the computer. No further
action is required.
✍
When the module is fully seated, the latches on each side are straight up and
locked into the slot on each side of the module. If the latches are not completely
straight upright, continue to press down on each side of the module until the
latches lock into place.
Tab fits into slot in
CD-RW/DVD combo drive