9tv and satellite receiver – Sony WEGA KV-27FS13 User Manual
Page 21
Connecting Your TV
9
TV and Satellite Receiver
1
Connect the cable from your satellite antenna to SATELLITE IN on
your satellite receiver.
2
Connect the coaxial cable from your cable or antenna to the
VHF/UHF jack on your TV.
3
Using Audio/Video cables (not supplied), connect AUDIO and
VIDEO OUT on your satellite receiver to AUDIO and VIDEO IN on
your TV.
For optimum picture quality, use S VIDEO instead of the yellow Audio/ Video
cable. S VIDEO does not provide sound; the audio cables must still be connected.
You can use the
button to switch between the VHF/UHF and satellite
receiver inputs.
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)
From
cable/
antenna
1
2
3
Satellite
antenna
cable
Satellite Receiver
This manual is related to the following products: