Ariens sno-tek 920401 - Manual (Page 20)

GB - 20
SHEAR BOLTS
(Figure 14)
IMPORTANT: Use only Ariens shear bolts for
replacement. Use of any other type of shear
bolt may result in severe damage to unit and
may void the warranty.
Occasionally a foreign object may enter the
auger/impeller housing and jam the auger,
breaking shear bolts which secure the auger
to the shaft. This allows auger to turn freely
on the shaft which may help prevent damage
to gear case and its components.
For Replacement:
1. Align shear bolt holes in auger with
shear bolt holes in the shaft.
2. Drive shear bolt through hole (if shear
bolt was broken this will drive remaining
part from shaft).
3. Secure shear bolt with nut.
DISCHARGE CHUTE DEFLECTOR
(Figure 15)
Deflector must stay in selected position while
throwing snow.
To adjust, loosen then retighten the wing
knob to desired tension.
Figure 13
OS0482
1. Skid Shoe
2. Skid Shoe Hardware
1
2
Figure 14
1. Auger
2. Shear Bolts
OS8230
1
2
Figure 15
OS8245
1. Wing Knob
2. Discharge Chute Deflector
3. Discharge Chute
1
2
3