Sony SDM-HS95PS - Manual (Page 20)

20
Specifications
SDM-HS75P
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 17.0 inch
Input signal format RGB operating frequency*
Horizontal: 28–80 kHz (analog RGB)
28–64 kHz (digital RGB)
Vertical: 48–75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75
Ω, positive
SYNC signal
TTL level, 2.2 k
Ω,
positive or negative
(Separate horizontal and vertical)
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Power consumption Max. 45 W
Operating temperature 5–35 ° C
Dimensions (width/height/depth)
Display (upright):
Approx. 388
Ч 382.5 Ч 139.2 mm
(15
1
/ 4
Ч 15 Ч 5 1
/ 2 inches)
Mass Approx. 5 kg (11 lb.
3
/ 8 oz.)
Plug & Play DDC2B
Accessories See page 7.
SDM-HS95P
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 19.0 inch
Input signal format RGB operating frequency*
Horizontal: 28–80 kHz (analog RGB)
28–64 kHz (digital RGB)
Vertical: 48–75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75
Ω, positive
SYNC signal
TTL level, 2.2 k
Ω,
positive or negative
(Separate horizontal and vertical)
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Power consumption Max. 60 W
Operating temperature 5–35 ° C
Dimensions (width/height/depth)
Display (upright):
Approx. 435
Ч 418 Ч 146 mm
(17
1
/ 8
Ч 16 1
/ 2
Ч 5 3
/ 4 inches)
Mass Approx. 6 kg (13 lb. 3 5 / 8 oz.)
Plug & Play DDC2B
Accessories See page 7.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.