Sony XDP-MU110 User Manual

Page 12

Notes

• After you attach the strap to the cradle, pull

the strap gently to make sure that the strap
is securely attached to the cradle.

• Do not forcefully pull the cradle after

attaching the strap. Doing so may damage
your car.

Remove the cover from the suction cup
gently.

Note

• It may be difficult to remove the cover from

the suction cup as the adhesive strength of
the suction cup is strong.

Press down the suction cup gradually,
expelling the air under the suction cup
(

), and press the PUSH button firmly

enough to secure the cradle on the
dashboard (

).

Notes

• If the suction cup contains air, the adhesive

strength of the suction cup will be
weakened.

• Make sure that the suction cup is dry before

mounting the cradle.

Tip

• The suction cup may contain tiny holes.

This can occasionally occur in the
production process, and should not cause a
malfunction.

Turn the LOCK/RELEASE lever
counterclockwise 90 degrees to secure
the cradle on the dashboard.

Note

• Before turning the LOCK/RELEASE lever,

make sure that you have pressed the PUSH
button hard and expelled the air from under
the suction cup.

Connect the cradle cable.
Rotate the arm of the cradle to the
horizontal position, and connect the
cradle cable.

Notes

• Make sure that the

 marks on the

connector are visible, as shown in the
illustration, when connecting the cradle
cable.

• Do not use any cable other than the supplied

cradle cable.

Cover