Sony DAV-X1 - Manual (Page 68)

68 US
• While playing a Super VCD on which the audio track
2 is not recorded, no sound will come out when you
select [2:STEREO], [2:1/L], or [2:2/R].
• You cannot change the sound for Super Audio CDs.
To check the audio signal format
(DVD VIDEO only)
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears on the
screen. This function is prohibited on some
discs.
x When playing a DVD VIDEO
Example:
Dolby Digital 5.1 ch
Example:
Dolby Digital 3 ch
Reinforcing bass frequencies
You can reinforce bass frequencies on any
source.
1
Make sure the function is set to “DVD.”
If not, press FUNCTION repeatedly until
“DVD” appears in the front panel display.
2
If a disc is playing, press x to stop,
then press WOOFER.
The SPEAKER SETUP appears.
3
Select the desired subwoofer level
using
X/x, then press ENTER.
The setting is selected and setup is
complete.
Note
1:ENGLISH DOLBY DIGITAL 3 / 2 .1
Surround (L/R)
Front (L/R) +
Center
LFE (Low
Frequency Effect)
2:SPANISH DOLBY DIGITAL 2 / 1
Front (L/R)
Surround
(Monaural)
Using the Sound Effect
AMP MENU
X/x/c
ENTER
FUNCTION
With cover opened.
NIGHT
x
WOOFER
SPEAKER SETUP
SUBWOOFER: 0.0dB
LEVEL: