Sony VGP-UPR1 - Manual (Page 35)

VGP-UPR1 (JP/GB/FR/ES/CT/KR) 3-296-348-02(1)
GB
Disconnecting the product
Note

When disconnecting the product from the personal computer, confirm that the connected devices can be disconnected
safely.
1 Exit the software being used by the USB device connected to the product.
2 Disconnect the USB connector connected to the personal computer.

If a USB HDD or USB memory is connected
1 Click “Safely Remove Hardware” on the taskbar.
The “Safely Remove Hardware” screen will appear.
2 After selecting “USB Mass Storage Device” in the “Safely Remove Hardware” screen, click
“Stop.”
The “Stop a Hardware device” screen will appear.
3 Select the “USB Mass Storage Device” connected to the product, then click “OK.”
The “Safe To Remove Hardware” screen will appear.
4 Click “OK.”
Prepared for disconnection.
5 After the POWER lamp or Access lamp of the connected product turns off, disconnect the
product.