Sony KDS-50A2000 - Manual (Page 26)

Basic Operations
26
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\030BAS.fm masterpage:3 columns Right
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Follow the steps below to program your TV’s remote control to operate non-
Sony video equipment.
Find the three-digit code for your equipment from the “Manufacturer’s
Codes” listed on page 27. If more than one code number is listed, try
entering from the code listed first.
1 Press and hold the , or FUNCTION button you want to
program on the remote control and press the button simultaneously.
The selected FUNCTION button (BD/DVD, DVR/VCR or
SAT/CABLE) will flash.
2 Enter the three-digit manufacturer’s code number using the --9
buttons while the FUNCTION button is lit. If the code is not entered
within 10 seconds, you must start again from step 1.
3 Press the button while the FUNCTION button is lit.
When the programming is correct, the selected FUNCTION button
blinks twice, and when not, blinks five times.
To check if the code works
Aim your TV’s remote control at the equipment, and press the green
button. If you can turn the equipment on and off by using the remote control,
then the programming is complete. If not, try the next code listed.
Sony Equipment Programmable Code Number
BD/DVD 101 (Sony Blu-ray Disc Player)
DVR/VCR 901 (Sony Dream System)
SAT/CABLE 801 (Sony Satellite Receiver)
✍
While , and buttons are labeled as such, you can still
program any of your connected equipment using any one of the buttons
regardless of the label. For example,
button can be programmed to
operate your VCR. If you have a DVD/VCR combo that you want to
operate with your TV remote control, you can program with the
or
or even the , but remember which button you have
programmed for your particular use.
✍
If no code is input within the above specified time, or an invalid or
incorrect code number is input, the remote control automatically goes
back to the previous setting.
✍
In some cases, you may not be able to program your remote control to
operate other equipment. In such cases, use the equipment’s own
remote control.
BD/DVD DVR/VCR SAT/CABLE
DIS
PL
A Y
BD/DVD DVR/VCR SAT/CABLE
BD/DVD
BD/DVD
DVR/VCR SAT/CABLE
POWER POWER