Alpine MRV-F900 - Manual (Page 16)

12
- EN
Mounting the Terminal Cover
• The product’s appearance can be improved by mounting the terminal cover on the main unit
after installation.
• Mount the terminal cover after the connections have been made and you have checked that
operation is normal.
1
Open the door.
1) Use the included hexagonal wrench to remove the two hexagonal screws q fastening
the door p.
2) Open the door p.
Connection
2
Mounting the terminal cover
1) Before mounting the terminal cover
• Fasten the wires securely together in a position in which they will not touch the termi-
nal cover.
2) Use the two included hexagon screws (M3) e to mount the included terminal cover w to
the top surface of the terminal section.
* Tighten the screws securely so that they do not come loose due to vibrations while the
vehicle is moving.
3) After mounting the terminal cover
• Check that the cords do not touch the terminal cover.
* If the cords touch the terminal cover, the vibrations of the vehicle may damage the
wires or cause short-circuiting.
w
p
Fig. 11
e
Fig. 10
p
q