Altec Lansing IN MOTION IMT520 - Manual (Page 6)

4
Getting Started
How to Position the Adjustable Handle
Your Altec Lansing inMotion Kick speaker system is equipped with a unique
adjustable handle that doubles as a kick-stand. It provides both an easy
way to carry the speaker system as well as a stand to support the speaker
system when placed on a flat surface.
Prop the speaker system
on its adjustable handle
The adjustable handle doubles as a stand.
Rotate the handle to its rearmost position.
Simply grasp and swing the handle backward
from either the pack position or carry position.
Lift the speaker system
handle for carry
Rotate the handle to its top position. Simply
grasp and swing the handle backward from the
pack position or forward from the kick-stand
position.
Pack up the
speaker system
Rotate the handle to its down point, tucking it
snugly under the base of the speaker system.
Simply grasp and swing the handle down from
either the kick-stand position or carry position.
When the handle is in the pack position, the
speaker system will automatically turn off.
WARNING In order to prevent accidentally dropping your iPhone or iPod,
be sure to remove it from the docking station before picking up the speaker
system by the handle.
How to Install the AC Adapter
1
Connect the AC adapter cable plug
into the speaker system’s jack.
The jack is located on the back of
the system.
2
Plug the AC adapter into the
wall outlet.
WARNING Use of another AC adapter may
damage the product. Use only the supplied
AC adapter.
How to Charge the Lithium-Ion Battery
Your Altec Lansing inMotion Kick speaker
system includes a rechargeable lithium-ion
battery. This battery should be fully charged before initial use of the speaker
system. A full charge will provide up to 6.5 hours of continuous playing time.
1
Connect the speaker system to a wall outlet.
See the How to Install the AC Adapter section. When the speaker
system is on, the “Battery” LED will flash slowly to show the battery
is charging. Once the battery is fully charged, the “Battery” LED will
remain solid.
2
Allow the battery to charge.
Charging time: Approximately 4 hours for a full charge. When the
battery is low, the “Battery” LED will flash rapidly.
WARNING During the recharging process, it is typical for the battery
to become warm. To be safe, keep flammable materials away from the
speaker system.