Sony RDR-GX255 - Manual (Page 61)

61
Edi
ting
4
Select the character you want to enter
using M/m/</,, and press ENTER.
The selected character appears in the input
row.
You can only enter characters and symbols
that are displayed.
• To change the cursor position, select the
input row using M, and press
• To erase a character, select either of the
following setting buttons and press ENTER.
“Backspace”: Erases the character to the left
of the cursor.
“Delete”: Erases the character at the cursor
position.
“Clear”: Erases all the characters in the input
row.
• To insert a space, move the cursor to the
desired position, select “Space,” and press
ENTER.
• To insert a character, move the cursor to the
desired position, select the character, and
press ENTER.
5
Repeat step 4 to enter the remaining
characters.
To return to the Title List without renaming
the title, press O RETURN.
6
Select “Finish,” and press ENTER.
z Hint
You can also rename a disc (page 67). Follow steps 4 to
6 above when the “Disc Name” display appears.
Creating a Playlist
Playlist titles allow you to edit without changing
the original recordings (see “Edit options for
DVD-RWs (VR mode)/DVD-Rs (VR mode)” on
page 56). You can create a Playlist title by
combining up to 99 sections (scenes) from original
titles.
Notes
• If you erase an original title used in a Playlist, that
Playlist is also erased.
• You cannot create or edit Playlist titles on a finalized
disc. When you want to edit or record on the DVD-RW
(VR mode) again, unfinalize the disc (page 69).
1
Press SYSTEM MENU while the recorder is
in stop mode.
-RW VR -R VR
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8
0 0
9 9
M/m/ENTER
SYSTEM
MENU
H PLAY
TITLE LIST
x STOP
X PAUSE
ORIGINAL/
PLAYLIST
./>
Press ENTER :
Title Menu for DVD Title List.
10:10 AM Title List (Original)
Setup
Disc Setting
Edit
Title List
Timer
DV/D8 Dubbing
,continued