AEG FAVORIT 45003 - Manual (Page 18)

Programme and pro-
gramme knob posi-
tion
Degree of soil Type of load Programme description
PREWASH Any Partial load (to be
completed later in
the day).
1 cold rinse (to prevent food
scraps to bond).
Detergent is not necessary
with this programme.
1) During the Auto 45°-70° programme, the soil level of the dishes is given by how cloudy the water is. The
programme duration and consumptions can change. This depends if the appliance is fully or not and on the
level of soil on the dishes. The appliance adjusts automatically the temperature of the water during the main
wash.
2) This is the perfect daily programme to clean a not fully load. Ideal for a family of 4 persons who only want to
load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes. Please refer to separate leaflet supplied, for test data.
Consumption values
Programme 1) Energy (in kWh) Water (in litres)
AUTO 45°-70° 1,1 - 1,7 11 - 22
30 MIN 60° 0,9 9
INTENSIV CARE 70° 1,5 - 1,7 15 - 17
ECO 50° 1,0 - 1,1 12 - 13
PREWASH 0,1 4
1) The digital display shows the programme duration.
The pressure and temperature of the water, the variations of power supply and the quantity
of dishes can change these values.
SELECT AND START A WASHING PROGRAMME
Do these steps to set and start a washing programme:
1. Close the door.
2. Turn the programme knob to set the washing programme. Refer to the chapter 'Washing
programmes'.
– The phase indicator light or lights for the washing programme come on.
– The programme duration in the digital display flashes.
3. Press the start button.
– The washing programme starts automatically.
– When the programme starts, only the indicator light of the phase in progress stays
on. Programme duration is on with a static light.
When the washing programme operates, you cannot change the programme. Cancel the
washing programme.
WARNING!
Only interrupt or cancel a washing programme if necessary.
18 Select and start a washing programme