Asus P4B533-VM - Manual (Page 42)

2-18 Chapter 2: Hardware information
®
P4B533-VM
1 2 2 3
(BASS/CENTER) (CENTER/BASS)
(Default)
P4B533-VM Bass/Center Setting
BCS1
BCS2
4. Bass/Center setting (3-pin BCS1, BCS2) (on audio models only)
These jumpers allow you to select the speaker output for a 6-channel
audio system. Switch the jumpers from the BASS/CENTER (pins 1-2)
position to CENTER/BASS (pins 2-3) position to re-route signals on the
internal leads of the Mic port.
Use the audio driver included in the support CD to install the multi-
channel audio feature.
5. SMBus 2.0 setting (two 3-pin SMB2.0)
These jumpers allow you to enable or disable the SMBus 2.0 support
on the motherboard. When these jumpers are set to pins 2-3 (Support),
you may install PCI devices compliant with SMBus 2.0 specification.
®
P4B533-VM
P4B533-VM SMBus 2.0
SMB2.0
1
2 2
3
Not Support Support