Sony PCV-RZ50C - Manual (Page 45)

Connecting the Telephone and Modem cables
45
Connecting the Telephone and Modem cables
1 Unplug your telephone from the wall jack and plug it into the telephone jack,
located on the back panel of your computer.
2 Plug the modem cable (supplied) into the Line jack, located on the back
panel of your computer.
3 Plug the other end of the modem cable into the wall jack.
To connect the telephone and modem cables
Your computer has a protective sticker covering the Ethernet port located
on the rear panel. Connect 10BASE-T, 100BASE-TX or 1000BASE-TX cables to
the Ethernet port. Using other cables or a telephone cable may result in an
electric current overload that can cause a malfunction, excessive heat, or fire
in the Ethernet port. For help on connecting to a network, see your network
administrator.
VHF/UHF AUDIO AUDIO – VIDEO1 INPUT – S VIDEO COMPOSITE