Reliability condition, 1. temperature condition, Recommended connector – DMC FST Series User Manual

Page 7: 1. recommended connector

DER-S0096A

FST Series Product Specifications

3. Reliability Condition

3-1. Temperature Condition

§ Temperature Condition Test

Following test are performed in the condition with no dew condensation:

Cold Test:

Tested after leaving the parts in -40°C



3°C for 240 hours and in the room temperature

for 2 hours.

Heat Test:

Tested after leaving the parts in 80°C



3°C for 240 hours and in the room temperature for

2 hours.

Humidity Test: Tested after leaving the parts in the temperature 60°C



3°C, humidity 90 to 95% for 240

hours and in the room temperature for 2 hours.

Cycle Test:

Tested after 5 cycles of leaving the parts in the temperature -30°C



3°C for 1 hour and in

the room temperature for 0.5 hours, then leaving the parts in the temperature 70°C



3°C

for 1 hour and in the room temperature for 0.5 hours.

Judgement:

Must satisfy the following:
Activation Force: