6. appearance – DMC FST Series User Manual
Page 4
DER-S0096A
4
Rev. 5 ©2005 - 2013 DMC Co., Ltd.
FST Series Product Specifications
1-6. Appearance
§ Scratch, dust (W = width, L = length, D = average diameter = (longest + shortest) /2)
Item
Width (mm)
Length (mm)
Acceptable Numbers
Total
Linear(Scratch/Dust)
Over 0.1mm in
diameter refer to the
Circular.
0.1
W>0.05
4
L
1pcs in
30mm
Within 5pcs
/panel
0.05
W>0.03
10
L
2pcs in
20mm
0.03
W
20
L
Acceptable
Circular
(Scratch/Dust)
0.4
D>0.3 *1
1pcs in viewing area *1
0.3
D>0.2
2pcs in
30mm
0.2
D
Acceptable
Applied only in the Active Area. Scratches or dusts in the outside of the Active Area are acceptable unless the
electrical characteristics are affected.
*1 Applied to the size of 14 inches or more.
§ Dirt
Acceptable if not noticeable on a black mat.
§ Chip, crack (t = glass thickness) (applicable only for the glass)
Item
Size (mm)
Acceptable Numbers
Corner
X
3
2pcs
/panel
Y
3
Z
t
Side
X
5
2pcs
/side
Y
3
Z
t
Crack
Not acceptable
X
Y
Z
Z
X
Y