Sony KDL-46EX700 - Manual (Page 5)

− 5 −
Additional Information for Using Sony Wall-Mount Bracket (SU-WL500)
Unit: inches (mm)
Model Name Display
dimensions
Screen center
dimensions
Length for each mounting angle
Angle (0°) Angle (20°)
       
KDL-32EX40 *
31 1 /
2
(800)
19 5 /
8
(497)
6 7 /
8
(172)
16 7 /
8
(426)
6 1 /
4
(157)
12
(303)
18 5 /
8
(470)
18 1 /
4
(461)
KDL-46EX405
44 3 /
8
(1,127)
26 5 /
8
(674)
3 3 /
8
(84)
16 3 /
4
(424)
6 1 /
2
(162)
14 5 /
8
(369)
25 1 /
4
(640)
18 3 /
8
(464)
KDL-32EX30 *
31 1 /
2
(800)
19 5 /
8
(497)
6 7 /
8
(172)
16 7 /
8
(426)
6 1 /
4
(157)
12
(303)
18 5 /
8
(470)
18 1 /
4
(461)
* In the actual model names, the “” indicates numbers and/or characters specific to each model.
** Do not install the TV in an inclined position. It is designed to be operated in a vertical position only. Eject and take out any disc
from the built-in BD player before installing the TV on a wall.
Figures in the above table may differ slightly depending on the installation.
CAUTION
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV.
Refer to your TV’s operating instructions for its weight.
3 Install the Base Bracket on the wall.
Refer to the Instructions for SU-WL500.
4 Disconnect all the cables from the TV.
5 Secure the Mounting Hook to the rear of the TV.
Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to
the “Screw and Hook Locations Diagram/Table” shown below.

KDL-HX70 *, KDL-EX50*, KDL-EX40*, KDL-EX30* only
Screw
(+PSW6 × 16)
Square
hole
Mounting Hook