Step 2: connecting the audio cords, Select a connection – Sony DVP-F25 User Manual

Page 18

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.

Select a connection

Select one of the following connections,

through

* Manufactured under license from Dolby

Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.

** “DTS” and “DTS Digital Out” are trademarks

of Digital Theater Systems, Inc.

Components to be connected

Connection

Your setup

TV
• Surround effects: TVS DYNAMIC (page 47),

TVS WIDE (page 47)

(page 19) Example

Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 47)
or
MD deck/DAT deck
• Surround effects: none

(page 20) Example

AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)

(page 62)

(page 21) Example

AV amplifier (receiver) with a digital input jack
having a Dolby Digital, or DTS** decoder and 6
speakers
• Surround effects: Dolby Digital (5.1ch) (page 63),

DTS (5.1ch) (page 63)

(page 22) Example