Sony VGC-LV170J User Manual
Page 25
25
Getting Started
3
Connect other cables to the computer, if necessary.
❑ To set up TV connections available on models with the TV tuner board, see Setting Up TV Connections
.
❑ To connect an HDMI cable to the HDMI INPUT port for using the HDMI Input function, see Using the HDMI Input
Function
.
❑ To connect your computer to an Ethernet network, see Connecting to a Network (LAN)
.
4
Snap open the cable clamp (6), route the cables through it, and then snap the cable clamp back shut.
5
Replace the stand cover and the back panel cover.
See Removing and Replacing the Covers
for the procedure.
✍
To disconnect your computer completely from AC power, unplug the power cord when the computer is off.
Make sure that the AC outlets are easily accessible.
!
If you unplug the power cord from your computer while the computer is on or in Sleep mode, you may lose all unsaved data.