beautypg.com

Changing the command mode of the, Receiver, Changing the command mode of the receiver – Sony HT-DDW650 User Manual

Page 34

background image

34

US

HT-DDW650 4-244-183-71(1) US

Changing the command
mode of the receiver

This function is useful when you use 2 Sony
receivers in the same room.

1

Turn off the receiver.

2

Hold down ENTER and press

1/u to

turn on the receiver.

“C.MODE.AVX” appears in the display.
Each time you repeat the procedure above,
the display changes as follows:
C.MODE.AV1

y C.MODE.AV2

Tip

The initial setting is “C.MODE.AV2”.

Notes

• The command mode of the supplied remote is

“AV2” and you cannot change this setting.

• If the command mode of the receiver and the

remote is different, you cannot use the remote to
operate the receiver.

See also other documents in the category Sony Home Theater Systems: