Sony HT-DDW650 - Manual (Page 33)

Other Operations
33
US
HT-DDW650 4-244-183-71(1) US
Adjustments using the
SET UP menu
The SET UP menu allows you to make the
following adjustments.
1
Press MAIN MENU repeatedly to select
“ SET UP ”.
2
Press MENU or MENU to select
the parameter you want to adjust.
3
Press MENU + or MENU – to select the
setting you want.
The setting is entered automatically.
Initial settings
Parameter Initial setting
DEC. XXXX PCM (for DVD),
AUTO (for VIDEO 2)
x Decode priority (DEC. XXXX)
Sets the appropriate decoding for incoming
digital signals.
• PCM priority mode (DEC. PCM)
Use to enjoy playback from audio CD (PCM)
and DVD. When used with media other than
CD or DVD, you may experience noise. If
this happens, switch to AUTO mode.
• AUTO mode (DEC. AUTO)
Use to enjoy playback from audio CD
(PCM), DVD, DTS-CD and DTS-LD
sources. However, with audio CDs, you may
not be able to listen the very first moments of
each track.
Normally, use as-is with the initial settings
above.
Recording on a video tape
You can record from a VCR, a TV or a DVD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
1
Select the program source to be
recorded.
2
Prepare the component for playing.
For example, insert the DVD you want to
record into the DVD player.
3
Insert a blank video tape into the VCR
(VIDEO 1) for recording.
4
Start recording on the recording VCR,
then start playing the video tape or
DVD you want to record.
Tip
You can record the sound from any audio source onto
a video tape while copying from a video tape or
DVD. Locate the point where you want to start
recording from another audio source, select the
program source, then start playback. The audio from
that source will be recorded onto the audio track of
the video tape instead of the audio from the original
medium. To resume audio recording from the original
medium, select the video source again.
Note
Make sure to make both digital and analog
connections to the VIDEO 2 and DVD inputs. Analog
recording is not possible if you make only digital
connections.