ALFA WLAN Outdoor Bridge AWAP08O-11gHP - Manual (Page 51)

51
Static IP
You can get the IP configuration data of Static-IP from your ISP. And you
will need to fill the fields of IP address, subnet mask, gateway address,
and one of the DNS addresses.
IP Address: The Internet Protocol (IP) address of WAN interface provided by your
ISP or MIS. The address will be your network identifier besides your
local network.
Subnet Mask: The number used to identify the IP subnet network, indicating whether
the IP address can be recognized on the LAN or if it must be reached
through a gateway.
Default Gateway: The IP address of Default Gateway provided by your ISP or MIS.
Default Gateway is the intermediate network device that has knowledge
of the network IDs of the other networks in the Wide Area Network, so it
can forward the packets to other gateways until they are delivered to the
one connected to the specified destination.
DNS 1~3: The IP addresses of DNS provided by your ISP.
DNS (
Domain Name Server) is used to map domain names to IP
addresses. DNS maintain central lists of domain name/IP addresses and
map the domain names in your Internet requests to other servers on the
Internet until the specified web site is found.
Clone MAC
Address: Clone device MAC address to the specify MAC address required by your
ISP
Enable uPnP: Enable uPnP, this function allows the device to be found and configured
automatically by the system. (Ex. Window XP)