Sony DVP-NS975V - Manual (Page 26)

26
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jacks.
B
B-1
B-2
OPTICAL FRONT COAXIAL
DIGITAL OUT
5.1CH OUTPUT
REAR CENTER
WOOFER
L
R
1
2
1
2
R-AUDIO-L
LINE OUT
S VIDEO
OUT
VIDEO Y
COMPONENT VIDEO OUT CONTROL S
IN
P R P B
HDMI OUT
B-1 B-2
OPTICAL COAXIAL
DIGITAL OUT
1
2
R-AUDIO-L
LINE OUT
VIDEO
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red) (white)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
Stereo audio cord
(not supplied)
to audio input to coaxial or optical digital input
Coaxial digital cord
(not supplied)
or
l : Signal flow
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)